Optical Transceiver 1310nm Singlemode Multimode LC SFP Transceiver Module, 10km Fihla
ML-SFP-SX 1.25Gb/s SFP 1310nm 10km LC Mokhoa o le Mong
Lilemong tse 'maloa tse fetileng, khoebo ea rona e ile ea amohela le ho cheka mahlale a tsoetseng pele ka ho lekana lapeng le kantle ho naha.Ho sa le joalo, basebetsi ba mokhatlo oa rona ke basebetsi ba litsebi ba inehetseng ho nts'etsopele ea hau ea Optical Transceiver 1310nm Singlemode Multimode LC SFP Transceiver Module, 10km Finyella, Re ikemiselitse ho fana ka theknoloji le mekhoa ea tlhoekiso molemong oa hau!
Lilemong tse 'maloa tse fetileng, khoebo ea rona e ile ea amohela le ho cheka mahlale a tsoetseng pele ka ho lekana lapeng le kantle ho naha.Ho sa le joalo, basebetsi ba mokhatlo oa rona ke basebetsi ba litsebi ba inehetseng ho tsoelopele ea hau eaChina Transceiver module, transceiver ea mahlo, Tlhaloso: SFP module, SFP transceiver, Re thehile likamano tse matla le tse telele tsa tšebelisano 'moho le lik'hamphani tse ngata haholo khoebong ena Kenya le mose ho maoatle.Ts'ebeletso ea hang-hang le ea profeshenale kamora thekiso e fanoeng ke sehlopha sa rona sa baeletsi e thabisa bareki ba rona.Lintlha tse felletseng le liparamente tse tsoang ho thepa mohlomong li tla romelloa ho uena bakeng sa kananelo efe kapa efe e felletseng.Mehlala ea mahala e ka tlisoa 'me k'hamphani ea sheba k'hamphani ea rona.n Kenya bakeng sa lipuisano e lula e amoheleha.Ke tšepa hore u tla fumana lipotso 'me u thehe tšebelisano-'moho ea nako e telele.
Likarolo tsa Sehlahisoa
● E tšehetsa 1.25Gbps/1.0625Gbps bit rates
● Sehokelo sa Duplex LC
● Mohatla oa SFP oa pluggable o chesang
● 1310nm FP laser transmitter le PIN photo-detector
● E sebetsa bakeng sa khokahanyo ea 10Km SMF
● Tšebeliso e tlaase ea matla, <0.8W
● Digital Diagnostic Monitor Interface
● E lumellana le SFP MSA le SFF-8472
● EMI e tlaase haholo le tšireletso e babatsehang ea ESD
● Thempereichara ea mekoloko e sebetsang:
Khoebo: 0 ho ea ho 70 °C
Indasteri: -40 ho isa ho 85 °C
Lisebelisoa
● Gigabit Ethernet
● Fiber Channel
● Fetolela ho Switch interface
● Fetola lits'ebetso tsa sefofane sa morao-rao
● Sehokelo sa router/Seva
● Mekhoa e meng ea phetiso ea optical
Setšoantšo se sebetsang
Feletseng Maximum Ratings
Paramethara | Letšoao | Min. | Max. | Yuniti | Hlokomela |
Phepelo ea Voltage | Vcc | -0.5 | 4.0 | V | |
Mocheso oa polokelo | TS | -40 | 85 | °C | |
Mongobo o Batlang | RH | 0 | 85 | % |
Hlokomela: Khatello ea maikutlo e fetang tekanyo e felletseng e ka baka tšenyo e sa feleng ho transceiver.
Likarolo tse akaretsang tsa ts'ebetso
Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | Hlokomela |
Sekhahla sa Lintlha | DR | 1.25 | Gb/s | |||
Phepelo ea Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Phepelo ea Hona Joale | Icc5 | 220 | mA | |||
Mocheso oa Nyeoe ea Ts'ebetso. | Tc | 0 | 70 | °C | ||
TI | -40 | 85 |
Litšobotsi tsa Motlakase (TOP(C) = 0 ho 70 ℃, TOP(I) = -40 ho 85 ℃, VCC = 3.13 ho 3.47 V)
Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | Hlokomela | |
Phetiso | |||||||
Phapang ea ho kenya data | VIN, PP | 120 | 820 | mVpp | 1 | ||
Tx Tlosa Input-Holimo | VIH | 2.0 | Vcc+0.3 | V | |||
Tx Disable Input-Low | VIL | 0 | 0.8 | V | |||
Tx Fault Output-High | VOH | 2.0 | Vcc+0.3 | V | 2 | ||
Tx Phoso ea Phallo-tlase | TLHOKOMELO | 0 | 0.5 | V | 2 | ||
Phapang ea ho kenya letsoho | Rin | 100 | Ω | ||||
Moamoheli | |||||||
Phapang e fapaneng ea tlhahiso ea data | Vout, maq | 300 | 650 | 800 | mVpp | 3 | |
Rx LOS Output-Phahameng | VROH | 2.0 | Vcc+0.3 | V | 2 | ||
Rx LOS Output-tlase | VROL | 0 | 0.8 | V | 2 |
Lintlha:
1. TD+/- ke AC ea ka hare e kopantsoeng le ho felisoa ha phapang ea 100Ω ka hare ho module.
2. Tx Fault le Rx LOS ke lihlahisoa tse bulehileng tsa mokelli, tse lokelang ho huloa ka li-resistors tsa 4.7k ho 10kΩ ho boto ea baeti.Hlahisa motlakase pakeng tsa 2.0V le Vcc+0.3V.
3. Liphetho tsa RD+/- li kopantsoe ka hare ho AC, 'me li lokela ho felisoa ka 100Ω (phapang) ho mosebedisi SERDES.
Optical Characteristics (TOP(C) = 0 ho 70 ℃, TOP(I) =-40 ho 85 ℃,VCC = 3.13 ho 3.47 V)
Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | Hlokomela |
Phetiso | ||||||
Wavelength e sebetsang | λ | 1290 | 1310 | 1330 | nm | |
Ave. output power (E lumelletsoe) | LETSAMAITSA | -9 | -3 | dBm | 1 | |
Karolelano ea Phello | ER | 9 | dB | 1 | ||
RMS bophara ba spectral | Δλ | 0.65 | nm | |||
Nako ea ho phahama/hoetla (20%~80%) | Tr/Tf | 0.26 | ns | 2 | ||
Kotlo ea ho hasana | TDP | 3.9 | dB | |||
Sephetho sa Leihlo la Optical | E lumellana le IEEE802.3 z (polokeho ea aser ea sehlopha sa 1) | |||||
Moamoheli | ||||||
Wavelength e sebetsang | λ | 1310 | nm | |||
Boikutlo ba ho amohela | PSEN1 | -22 | dBm | 3 | ||
Keketseho | LETSAMAITSA | 0 | dBm | 3 | ||
Tsebo ea LOS | Pa | -35 | dBm | |||
LOS De-assert | Pd | -24 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 | dB |
Lintlha:
1. E lekantsoe ho 1.25Gb/s ka PRBS 2 223-1Mohlala oa tlhahlobo ea NRZ.
2. E sa sefshoang, e lekantsoeng ka PRBS223-1mohlala oa teko @1.25Gbps
3. E lekantsoe ho 1.25Gb/s ka PRBS 223-1Mohlala oa tlhahlobo ea NRZ bakeng sa BER <1 × 10-12
Pin Litlhaloso Le Mesebetsi
Pin | Letšoao | Lebitso/Tlhaloso | Lintlha |
1 | VeeT | Tx fatše | |
2 | Tx Phoso | Tx pontšo ea phoso, Open Collector Output, "H" e sebetsang | 1 |
3 | Tx Tlosa | Ho kenya LVTTL, ho hula ka hare, Tx e holofalitsoe ho "H" | 2 |
4 | MOD-DEF2 | 2 wire serial interface data input/output (SDA) | 3 |
5 | MOD-DEF1 | 2 wire serial interface clock input (SCL) | 3 |
6 | MOD-DEF0 | Pontšo ea hona joale ea mohlala | 3 |
7 | Rate khetha | Ha ho khokahano | |
8 | TLHOKOMELO | Ho lahleheloa ke lets'oao la Rx, Output ea Open Collector, "H" e sebetsang | 4 |
9 | VeeR | Rx fatše | |
10 | VeeR | Rx fatše | |
11 | VeeR | Rx fatše | |
12 | RD- | Lintlha tse amohetsoeng tse fapaneng li tsoile | 5 |
13 | RD+ | Lintlha tse fumanoeng | 5 |
14 | VeeR | Rx fatše | |
15 | VccR | Phepelo ea motlakase ea Rx | |
16 | VccT | Tx phepelo ea motlakase | |
17 | VeeT | Tx fatše | |
18 | TD+ | Fetisetsa data ho | 6 |
19 | TD- | Inverse fetisa data ho | 6 |
20 | VeeT | Tx fatše |
Lintlha:
1. Ha e phahame, tlhahiso ena e bontša phoso ea laser ea mofuta o itseng.Tlase e bonts'a ts'ebetso e tloaelehileng.'Me e lokela ho huleloa ka sehanyetsi sa 4.7 - 10KΩ ho boto ea baeti.
2. TX disable ke input e sebelisetsoang ho koala transmitter optical output.E huleloa ka har'a mojule ka mohanyetsi oa 4.7 - 10KΩ.Maemo a eona ke:
Tlase (0 – 0.8V): Transmitter on (>0.8, <2.0V): Ha ea hlalosoa
Holimo (2.0V~Vcc+0.3V): Transmitter E Holofetse E Bulehile: Transmitter E Holofetse
3. Mod-Def 0,1,2.Tsena ke li-pins tsa tlhaloso ea module.Li lokela ho huleloa ka sehanyetsi sa 4.7K - 10KΩ ho boto ea baeti.Motlakase oa ho hula o lokela ho ba pakeng tsa 2.0V~Vcc+0.3V.
Mod-Def 0 e thehiloe ke mojule ho bontša hore mojule o teng
Mod-Def 1 ke mohala oa oache oa li-wire serial interface tse peli bakeng sa serial ID
Mod-Def 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa serial ID
4. Ha e phahame, tlhahiso ena e bontša tahlehelo ea letšoao (LOS).Tlase e bonts'a ts'ebetso e tloaelehileng.
5. RD+/-: Tsena ke liphetho tse fapaneng tsa moamoheli.Ke mela e fapaneng ea AC e kopantsoeng le 100Ω e lokelang ho felisoa ka 100Ω (phapang) ho mosebelisi SERDES.Khokahano ea AC e etsoa ka har'a mojule mme ka hona ha e hlokehe ho boto ea baeti.
6. TD+/-: Tsena ke lisebelisoa tse fapaneng tsa transmitter.Ke mela e kopantsoeng ea AC, e fapaneng e nang le phapang ea 100Ω ka har'a mojule.Khokahano ea AC e etsoa ka har'a mojule mme ka hona ha e hlokehe ho boto ea baeti.
Litlhaloso tsa Digital Diagnostic
Li-transceivers li ka sebelisoa lits'ebetsong tse amohelang batho tse hlokang tlhahlobo ea dijithale e lekantsoeng ka hare kapa kantle.
Paramethara | Letšoao | Diyuniti | Min. | Max. | Ho nepahala | Hlokomela |
Mocheso oa mocheso oa transceiver | DTemp-E | ºC | -45 | +90 | ±5ºC | 1 |
Transceiver phepelo ea motlakase | DVoltage | V | 2.8 | 4.0 | ±3% | |
Phetiso ea leeme la hajoale | DBias | mA | 2 | 15 | ±10% | 2 |
Matla a tsoang ho transmitter | DTx-Matla | dBm | -10 | -2 | ±3dB | |
Karolelano ea matla a ho kenya moamoheli | DRx-Matla | dBm | -25 | 0 | ±3dB |
Lintlha:
1.Mocheso oa ho sebetsa.=0~70 ºC, sebaka se tla ba min=-5,Max=+75
2. Ho nepahala ha Tx bias hona joale ke 10% ea nako ea sebele ho tloha ho mokhanni oa laser ho ea ho laser.
3. Internal/ External Calibration e tsamaellana.