Moetsi oa OEM/ODM Sebaka se Selelekela sa Ddm LC Duplex 20km 1310nm 2.5g SFP Transceiver Module
ML-SFP-SX 1.25Gb/s SFP 1310nm 10km LC Mokhoa o le Mong
Ka tsamaiso ea rona e khabane, bokhoni bo matla ba tekheniki le mokhoa o thata oa taolo ea boleng bo holimo, re tsoela pele ho fa bareki ba rona boleng bo tšepahalang, litheko tse ntle le bafani ba thepa ba ntle haholo.Re ikemiselitse ho ba e mong oa balekane ba hau ba tšepahalang haholo le ho fumana khotsofalo ea hau bakeng sa Moetsi oa OEM/ODM Long Distance Ddm LC Duplex 20km 1310nm 2.5g SFP Transceiver Module, Re ikemiselitse ho fana ka theknoloji ea tlhoekiso le tharollo bakeng sa hau!
Ka tsamaiso ea rona e khabane, bokhoni bo matla ba tekheniki le mokhoa o thata oa taolo ea boleng bo holimo, re tsoela pele ho fa bareki ba rona boleng bo tšepahalang, litheko tse ntle le bafani ba thepa ba ntle haholo.Re ikemiselitse ho ba e mong oa balekane ba hau ba tšepahalang le ho fumana khotsofalo ea hau bakeng saChina Ddm le Wdm, LC Duplex 1310nm, Tlhaloso: SFP module, SFP transceiver, Re na le karolo e kholo 'marakeng oa lefatše lohle.Khamphani ea rona e na le matla a matla a moruo mme e fana ka litšebeletso tse ntle haholo tsa thekiso.Hona joale re thehile tumelo, botsoalle, likamano tsa khoebo tse lumellanang le bareki linaheng tse fapaneng., joalo ka Indonesia, Myanmar, Indi le linaha tse ling tsa Asia Boroa-bochabela le linaha tsa Europe, Afrika le Latin America.
Likarolo tsa Sehlahisoa
● E tšehetsa 1.25Gbps/1.0625Gbps bit rates
● Sehokelo sa Duplex LC
● Mohatla oa SFP oa pluggable o chesang
● 1310nm FP laser transmitter le PIN photo-detector
● E sebetsa bakeng sa khokahanyo ea 10Km SMF
● Tšebeliso e tlase ea matla,<0.8W
● Digital Diagnostic Monitor Interface
● E lumellana le SFP MSA le SFF-8472
● EMI e tlaase haholo le tšireletso e babatsehang ea ESD
● Thempereichara ea mekoloko e sebetsang:
Khoebo: 0 ho ea ho 70 °C
Indasteri: -40 ho isa ho 85 °C
Lisebelisoa
● Gigabit Ethernet
● Fiber Channel
● Fetolela ho Switch interface
● Fetola lits'ebetso tsa sefofane sa morao-rao
● Sehokelo sa router/Seva
● Mekhoa e meng ea phetiso ea optical
Setšoantšo se sebetsang
Feletseng Maximum Ratings
Paramethara | Letšoao | Min. | Max. | Yuniti | Hlokomela |
Phepelo ea Voltage | Vcc | -0.5 | 4.0 | V | |
Mocheso oa polokelo | TS | -40 | 85 | °C | |
Mongobo o Batlang | RH | 0 | 85 | % |
Hlokomela: Khatello ea maikutlo e fetang tekanyo e felletseng e ka baka tšenyo e sa feleng ho transceiver.
Likarolo tse akaretsang tsa ts'ebetso
Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | Hlokomela |
Sekhahla sa Lintlha | DR |
| 1.25 |
| Gb/s | |
Phepelo ea Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Phepelo ea Hona Joale | Icc5 |
| 220 | mA | ||
Mocheso oa Nyeoe ea Ts'ebetso. | Tc | 0 | 70 | °C | ||
TI | -40 | 85 |
Litšobotsi tsa Motlakase (TOP(C) = 0 ho 70 ℃, TOP(I) = -40 ho 85 ℃, VCC = 3.13 ho 3.47 V)
Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | Hlokomela | |
Phetiso | |||||||
Phapang ea ho kenya data | VIN, PP | 120 | 820 | mVpp | 1 | ||
Tx Tlosa Input-Holimo | VIH | 2.0 | Vcc+0.3 | V | |||
Tx Disable Input-Low | VIL | 0 | 0.8 | V | |||
Tx Fault Output-High | VOH | 2.0 | Vcc+0.3 | V | 2 | ||
Tx Phoso ea Phallo-tlase | TLHOKOMELO | 0 | 0.5 | V | 2 | ||
Phapang ea ho kenya letsoho | Rin | 100 | Ω | ||||
Moamoheli | |||||||
Phapang e fapaneng ea tlhahiso ea data | Vout, maq | 300 | 650 | 800 | mVpp | 3 | |
Rx LOS Output-Phahameng | VROH | 2.0 | Vcc+0.3 | V | 2 | ||
Rx LOS Output-tlase | VROL | 0 | 0.8 | V | 2 |
Lintlha:
1. TD+/- ke AC ea ka hare e kopantsoeng le ho felisoa ha phapang ea 100Ω ka hare ho module.
2. Tx Fault le Rx LOS ke lihlahisoa tse bulehileng tsa mokelli, tse lokelang ho huloa ka li-resistors tsa 4.7k ho 10kΩ ho boto ea baeti.Hlahisa motlakase pakeng tsa 2.0V le Vcc+0.3V.
3. Liphetho tsa RD+/- li kopantsoe ka hare ho AC, 'me li lokela ho felisoa ka 100Ω (phapang) ho mosebedisi SERDES.
Optical Characteristics (TOP(C) = 0 ho 70 ℃, TOP(I) =-40 ho 85 ℃,VCC = 3.13 ho 3.47 V)
Paramethara | Letšoao | Min. | Tlanya | Max. | Yuniti | Hlokomela |
Phetiso | ||||||
Wavelength e sebetsang | λ | 1290 | 1310 | 1330 | nm | |
Ave. output power (E lumelletsoe) | LETSAMAITSA | -9 | -3 | dBm | 1 | |
Karolelano ea Phello | ER | 9 |
|
| dB | 1 |
RMS bophara ba spectral | Δλ | 0.65 | nm | |||
Nako ea ho phahama/hoetla (20%~80%) | Tr/Tf | 0.26 | ns | 2 | ||
Kotlo ea ho hasana | TDP | 3.9 | dB | |||
Sephetho sa Leihlo la Optical | E lumellana le IEEE802.3 z (polokeho ea aser ea sehlopha sa 1) | |||||
Moamoheli | ||||||
Wavelength e sebetsang | λ |
| 1310 |
| nm | |
Boikutlo ba ho amohela | PSEN1 | -22 | dBm | 3 | ||
Keketseho | LETSAMAITSA | 0 |
| dBm | 3 | |
Tsebo ea LOS | Pa | -35 | dBm | |||
LOS De-assert | Pd | -24 | dBm | |||
LOS Hysteresis | Pd-Pa | 0.5 |
| dB |
Lintlha:
1. E lekantsoe ho 1.25Gb/s ka PRBS 2 223-1Mohlala oa tlhahlobo ea NRZ.
2. E sa sefshoang, e lekantsoeng ka PRBS223-1mohlala oa teko @1.25Gbps
3. E lekantsoe ho 1.25Gb/s ka PRBS 223-1Mohlala oa tlhahlobo ea NRZ bakeng sa BER <1 × 10-12
Pin Litlhaloso Le Mesebetsi
Pin | Letšoao | Lebitso/Tlhaloso | Lintlha |
1 | VeeT | Tx fatše |
|
2 | Tx Phoso | Tx pontšo ea phoso, Open Collector Output, "H" e sebetsang | 1 |
3 | Tx Tlosa | Ho kenya LVTTL, ho hula ka hare, Tx e holofalitsoe ho "H" | 2 |
4 | MOD-DEF2 | 2 wire serial interface data input/output (SDA) | 3 |
5 | MOD-DEF1 | 2 wire serial interface clock input (SCL) | 3 |
6 | MOD-DEF0 | Pontšo ea hona joale ea mohlala | 3 |
7 | Rate khetha | Ha ho khokahano |
|
8 | TLHOKOMELO | Ho lahleheloa ke lets'oao la Rx, Output ea Open Collector, "H" e sebetsang | 4 |
9 | VeeR | Rx fatše |
|
10 | VeeR | Rx fatše |
|
11 | VeeR | Rx fatše |
|
12 | RD- | Lintlha tse amohetsoeng tse fapaneng li tsoile | 5 |
13 | RD+ | Lintlha tse fumanoeng | 5 |
14 | VeeR | Rx fatše |
|
15 | VccR | Phepelo ea motlakase ea Rx |
|
16 | VccT | Tx phepelo ea motlakase |
|
17 | VeeT | Tx fatše |
|
18 | TD+ | Fetisetsa data ho | 6 |
19 | TD- | Inverse fetisa data ho | 6 |
20 | VeeT | Tx fatše |
Lintlha:
1. Ha e phahame, tlhahiso ena e bontša phoso ea laser ea mofuta o itseng.Tlase e bonts'a ts'ebetso e tloaelehileng.'Me e lokela ho huleloa ka sehanyetsi sa 4.7 - 10KΩ ho boto ea baeti.
2. TX disable ke input e sebelisetsoang ho koala transmitter optical output.E huleloa ka har'a mojule ka mohanyetsi oa 4.7 - 10KΩ.Maemo a eona ke:
Tlase (0 – 0.8V): Transmitter on (>0.8, <2.0V): Ha ea hlalosoa
Holimo (2.0V~Vcc+0.3V): Transmitter E Holofetse E Bulehile: Transmitter E Holofetse
3. Mod-Def 0,1,2.Tsena ke li-pins tsa tlhaloso ea module.Li lokela ho huleloa ka sehanyetsi sa 4.7K - 10KΩ ho boto ea baeti.Motlakase oa ho hula o lokela ho ba pakeng tsa 2.0V~Vcc+0.3V.
Mod-Def 0 e thehiloe ke mojule ho bontša hore mojule o teng
Mod-Def 1 ke mohala oa oache oa li-wire serial interface tse peli bakeng sa serial ID
Mod-Def 2 ke mohala oa data oa terata e 'meli ea serial interface bakeng sa serial ID
4. Ha e phahame, tlhahiso ena e bontša tahlehelo ea letšoao (LOS).Tlase e bonts'a ts'ebetso e tloaelehileng.
5. RD+/-: Tsena ke liphetho tse fapaneng tsa moamoheli.Ke mela e fapaneng ea AC e kopantsoeng le 100Ω e lokelang ho felisoa ka 100Ω (phapang) ho mosebelisi SERDES.Khokahano ea AC e etsoa ka har'a mojule mme ka hona ha e hlokehe ho boto ea baeti.
6. TD+/-: Tsena ke lisebelisoa tse fapaneng tsa transmitter.Ke mela e kopantsoeng ea AC, e fapaneng e nang le phapang ea 100Ω ka har'a mojule.Khokahano ea AC e etsoa ka har'a mojule mme ka hona ha e hlokehe ho boto ea baeti.
Litlhaloso tsa Digital Diagnostic
Li-transceivers li ka sebelisoa lits'ebetsong tse amohelang batho tse hlokang tlhahlobo ea dijithale e lekantsoeng ka hare kapa kantle.
Paramethara | Letšoao | Diyuniti | Min. | Max. | Ho nepahala | Hlokomela |
Mocheso oa mocheso oa transceiver | DTemp-E | ºC | -45 | +90 | ±5ºC | 1 |
Transceiver phepelo ea motlakase | DVoltage | V | 2.8 | 4.0 | ±3% |
|
Phetiso ea leeme la hajoale | DBias | mA | 2 | 15 | ±10% | 2 |
Matla a tsoang ho transmitter | DTx-Matla | dBm | -10 | -2 | ±3dB | |
Karolelano ea matla a ho kenya moamoheli | DRx-Matla | dBm | -25 | 0 | ±3dB |
Lintlha:
1.Mocheso oa ho sebetsa.=0~70 ºC, sebaka se tla ba min=-5,Max=+75
2. Ho nepahala ha Tx bias hona joale ke 10% ea nako ea sebele ho tloha ho mokhanni oa laser ho ea ho laser.
3. Internal/ External Calibration e tsamaellana.
Tloaelehileng Interface Circuit
Litekanyo tsa sephutheloana